Ciare HT 264

With the help of the chassis overview page you find more than 5000 loudspeaker chassis.

=> more loudspeakers of this brand.
 

Ciare HT 264       order no. C-HT264       EUR 68,15 excl. VAT: € 57.27 / $ 67.58
26 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100/250 W
  • resonance frequency fs = 810 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 2,74 N/A
  • voice coil inductance L = 0,047 mH
  • effective piston radiating area Sd = 36,5625 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • equivalent volume of compliance Vas = 0,007 l
  • total Q factor Qts = 0,61 (Qms=1, Qes=1,54)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,65 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 50 mm
  • mass m = 0,66 kg
PDF data sheet
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted