Selenium 12 SW 5

With the help of the chassis overview page you find more than 5000 loudspeaker chassis.

=> more loudspeakers of this brand.
 

recommended cabinet 1:
closed cabinet with 23 L volume
from 56/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
92 L volume bass reflex cabinet
with HP100 reflex tube, 24 cm long.
from 27/22 Hz (-3dB/-8dB).

Selenium 12 SW 5       order no. Se-1360502       - not available (_)
30 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 650/1300 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 31 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 3 Ohm
  • voice coil inductance L = 3,3 mH
  • effective piston radiating area Sd = 520 cm2
  • equivalent volume of compliance Vas = 61,2 l
  • total Q factor Qts = 0,43 (Qms=5,2, Qes=0,47)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- - mm
  • mounting diameter d = 279 mm
  • overall diameter d = 311 mm
  • mounting depth (not countersunk) t = 133 mm
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted