Inosic

Inosic modules are made in Germany and carry a five year manufacturer's warrantee. They are well designed and finished (picture right: FCB of RAS-100).

All modules feature "soft-clipping" resulting in clean sound even when driven hard.

Explanations about the operation of subwoofer amplifiers

Inosic RAS-100

INOSIC RAS-100     on request (_)

technical data:
output: 100 Watt into 4 Ohm
damping factor: 200
discrete Darlington power amp
subsonic filter 30 Hz / 24 dB
bass boost +6dB at 32 Hz (fixed)
Active subwoofer module with toroidal transformer and huge electrolytic capacitors. The module features automatic power-on, volume, phase and cut-off frequency control as well as RCA inputs and high level screw input sockets. The unit switches to energy-saving stand-by mode should after a few minutes no signal be detected. Outside dimensions (HxWxD): 180 x 210 x 70 mm.

data sheet in PDF format

  back to overview
Inosic RAS-200 plus

INOSIC RAS-200 Plus     on request (_)

technical data:
output: 160 Watt into 4 Ohm
damping factor: 400
discrete Darlington power amp
subsonic filter: 20 Hz / 18 dB
bass manager: -6 .. +6 dB adjustable
Active subwoofer module with toroidal transformer and huge electrolytic capacitors. The module features automatic power-on, volume, phase and cut-off frequency control as well as a Bass-EQ. RCA and high level screw input sockets are available. The unit switches to energy-saving stand-by mode should after a few minutes no signal be detected. In addition the module provides small signal output for your main speaker with ajustable 12 dB high pass filter. Outside dimensions (HxWxD): 360 x 175 x 77 mm

data sheet in PDF format Inosic RAS-200

or in standard format (HxWxD): 190 x 260 x 77 mm (see picture on the right hand side). RAS 200 on request (_)

  back to overview
Inosic RAS-300

INOSIC RAS-300 plus     on request (_)

or with separate control unit (like RAS-400),
instead of controls on the module:

INOSIC RAS-300               on request (_)

Bedien-Panel
 
technical data:
output: 300 Watt into 3,3 Ohm
damping factor: 700
discrete Darlington power amp
subsonic filter at 15-40 Hz (-24 dB)
adjustable bass boost
Active subwoofer module with toroidal transformer and huge electrolytic capacitors. The module features automatic power-on, volume, phase and cut-off frequency control, subsonic frequency control as well as boost and EQ frequency control. RCA and high level screw input sockets are available. The unit switches to energy-saving stand-by mode should after a few minutes no signal be detected. Outside dimensions (HxWxD): 450 x 180 x 60 mm.

data sheet in PDF format

  back to overview
Inosic RAS-400

INOSIC RAS-400     on request (_)

technical data:
output: 400 Watt into 3,3 Ohm
damping factor: 700
discrete Darlington power amp
subsonic filter at15-40 Hz (-24 dB)
adjustable bass boost
Active subwoofer module with toroidal transformer and huge electrolytic capacitors. The module features automatic power-on, volume, phase and cut-off frequency control, subsonic frequency control as well as boost and EQ frequency control.

Available are a RCA as well as a symmetrical XLR input that maybe connected to subwoofer output or to studio / PA equipment.

The unit switches to energy-saving stand-by mode should after a few minutes no signal be detected. Outside dimensions (HxWxD): 474 x 180 x 92 mm and for the control panel (HxWxD) 60 x 250 x 92 mm.
  Bedien-Panel

The separate control panel comes with a 1.2 metre cable that maybe extended up to 10 metres.

data sheet in PDF format

  back to overview
  zur Übersicht

INOSIC RAS-400 G       on request (_)
or with 300 Watt

INOSIC RAS-300 G       on request (_)

The RAS 400 and RAS 300 modules are also available in a solid case.
Inosic RAS-400 G
technical data:
output: 400 Watt into 3,3 Ohm
(RAS 300: 300 Watt into 3,3 Ohm)
damping factor: 700
discrete Darlington power amp
subsonic filter at 15-40 Hz (-24 dB)
adjustable bass boost
dimensions (HxWxD): 90 x 435 x 315 mm

Controls on the front panel: Inosic RAS-400 G
  • subsonic filter with 24 dB/oct and adjustable between 15 and 40 Hz, releasing the subwoofer of the lowest frequencies
  • cut-off frequency with 24 dB/oct and adjustable between 40 and 150 Hz, releasing the subwoofer of high frequencies
  • phase control, continuously variable between 0 and 270 degrees (should be set to a position where the bass is loudest)
  • two bass boost controls (frequency and increase)
  • two EQ controls (frequency and decrease)

Inosic RAS-400 G

Available are a RCA as well as a symmetrical XLR input that maybe connected to subwoofer output or to studio / PA equipment.

The unit switches to energy-saving stand-by mode should after a few minutes no signal be detected.

Outside dimensions: (HxWxD): 90 x 435 x 315 mm

data sheet in PDF format

  back to overview